Randolph Roofer Teaches How to Remove Mold from Your Roof

Roofing contractor in Randolph New Jersey shows mold removing technique

Apart from the structural damages that your roof may encounter over its years of service, there are other roofing issues that you should be wary of. If you have started noticing some changes on the appearance of your roofing shingles and the indoor air quality of your home has drastically changed, it might only mean that molds are already present in the roofing system. To help you remove mold from your roof, outlined underneath some of the simple steps to take using basic household bleach that you may follow.

STEP 1: Before you start applying the bleach solution on the affected area of your roof, contact the main roofing contractor in Randolph.  make sure your that all of the plants and other objects on your lawn are far from your roof. Make sure that you create a safe radius around your home to avoid damages and accidents. If you have some pets or kids in your house, make sure that they will not venture out during the mold removal process. If you have some plants or planning to plant some flowers near your house or just directly beneath your roof eaves, try to cover the ground with tarps or plastic sheeting to avoid soil contamination.

 

roof before mold

STEP 2: After you have performed the safety measures listed above, you may now begin making and applying the bleach solution. In a two-gallon bucket, make a cleanser by mixing 1/4 chlorine bleach and 3/4 water, while adding 1 tablespoon of trisodium phosphate (TSP). While you are doing this, you need to put on some rubber gloves and breathing mask to protect yourself from the harmful fumes that the mixture will get with roof mold removal products. After thoroughly mixing the solution, pour it in a handheld pump sprayer, and apply the solution only to moldy shingles.

STEP 3: After you have sprayed the solution to the affected area, allow the mixture to soak into the mold affected shingles for a minimum of 15 minutes. If the shingles are severely affected by mold growth, it would be wise to allow a longer period of time before you start the rinsing process. After a reasonable period, try to rinse the affected shingles using your garden hose at a low pressure nearby roofing contractors. . When rinsing the shingles, you should start from the top to the bottom for a more systematic approach and to also avoid water seepage. After the solution has been rinsed, run your hands with the gloves on it to check for any residue on the shingles. If the shingle still feels slimy, you may need to repeat the process until molds are all fully removed.

Now those are some of the simple and basic steps you may do in order to remove mold on your roof. However, it is good to remember that when mold growth on your roofing shingles are constant and will likely reappear even after the process, you may want to consult a professional roofing contractor for help. They have the best knowledge and materials to deal with stubborn mold growth or infestation on your roofs. If you have anymore questions, then visit our main page.